- 103
- 269
AFTERMATH INCLUDED BELOW
A short time ago, a report was received at MDA's 101 hotline in the Yarkon region about a worker who was hit by a heavy object, during his work at a factory in the Ariel Industrial Park. MDA medics and paramedics determine the death of a 30-year-old worker with a head injury.
MDA paramedic Shir Salman said: "The worker was lying on the road in the factory where he works, after being hit on the head by a heavy object during his work at the factory. We performed medical tests on him, but unfortunately he was found with a severe head injury and no signs of life, and we had to pronounce him dead on the spot."
- 82
- 365
hello and welcome back π
today we cover why you need to pay attention at work and not do stupid shit
hydraulic press injuries
fingers caught in hydraulic press (separate instances)
auto errors
car falls on worker
car backs into man
lift runs over worker
explosions
βidk wtf happened hereβ
electrical wire incidents
worker shocked
steel mill accidents
In Loilo City, Philippines, 18-year-old Jomar Junco was found dead after he was found hanging out of a chorizo food processor
Police Major said that Junco initially got his right hand stuck inside the machine and was not able to pull it out and Junco was then pulled in by the grinder. "He was not grinded. He was just stuck". Investigators were told that Junco didn't not know how to operate the machine. When one of his co-workers stepped out of the room, Junco tried to operate the machine by himself and was killed quickly after.
scalpings
(my personal favorite and i have dedicated a whole post to these as well)
hair caught in machinery
woman scalped + restoration
scalping due to her hair getting caught in a factory's machines
spinny machine incidents
man's leg ripped off by spinny machine
arm caught in spinny machine
In Thailand, this mechanic was found dead after an accident during his shift at work. He was found inside of a large centrifugal extractor fan. When the police arrived, they managed to get the remains of the worker out of the machine
On November 2020-, a 65-year-old worker died at the KAMAZ PJSC factory in Naberezhnye Chelny, Tatarstan, Russia after getting caught in a spinning machine. He was trying to sharpen a machine part but was sucked in after his jacket gets caught on the wheel, resulting in being shredded
hair caught in ice cream mixer
A lot of the time, spinning machine incidents lead in death, scalpings, or great bodily injury..getting yourself in this situation is far too easy, this is why it is important to always be on high alert and hyper aware of your surroundings when around machinery like this. This most commonly happens by your hair or clothes getting caught in it when you're too close to the machine. Make sure to workplace safety guidelines and wear appropriately fitted clothing and keep your hair put up and out of the way to prevent injuries like this
close calls
β they survived β
helmet saves worker
It is important to follow proper safety precautions and follow OSHA guidelines properly
miscellaneous
pinned by machinery
hit by swinging object
fatal artery slash at work
hot metal slips and worker falls on top of it
man trapped in conveyor belt
cartoony ass fall
worker falls by overstepping on metal
in a world of OSHA violations
improper setups
hanging onto a pole for support when working
over stacked cans
fucking around with heavy machinery
improper working gear
what is an OSHA violation?
This is when a company or employee willingly or unknowingly ignores potential and real safety hazards
compilations
collection of (mostly) workplace accidents
workplace accident collection by congo
collection of animated workplace safety awareness videos
i hope you all enjoyed! and remember..make the new guy do it
- 137
- 375
Happened on November 19, 2020 in Naberezhnye Chelny, Tatarstan, Russia
56 years old man named Marat was working in a warehouse of Izher company.
He was working on DIP-300 lathe. Marat wasn't wearing working clothes. He had regular clothes with long sleeves on.
Marat reportedly bended over the lathe and started to "sharpen one of its parts".
Suddenly, the lathe turned on and shredded Marat into pieces. He died on spot.
TV Chenly spoke to neighbours of Marat:
We were living a calm life. We were greeting each other in the morning and in the evening. He was a fine man, always friendly.
One of the neighbours also said:
He and his wife are divorced. He had two kids: older daughter and younger son. They're both adults now. Son is around 23/24, daughter even older.
Son was living with his parents (Marat and his wife). His daughter was living separately.
All seven aftermath photos:
Sources:
Possibly "Famous Video"?
- 30
- 60
Talking to Tuoi Tre Online at 3:05 p.m. on April 22, Mr. Tran Huy Tuan, Chairman of Yen Bai Provincial People's Committee , confirmed that at Yen Bai Cement and Mineral Joint Stock Company (Yen Binh district) there had just been an accident. Labor accident killed 7 people.
"Yen Bai province will have specific information to the press" - Mr. Tuan added.
Full video:
Source:
https://tuoitre.vn/7-nguoi-tu-vong-tai-cong-ty-xi-mang-va-khoang-san-yen-bai-20240422171242486.htm
- 23
- 93
At 16:59 on February 2, 2023, a mechanical injury accident occurred at a Changsha Machinery Co., Ltd., resulting in one death.
After preliminary understanding, the cause of this production safety accident was that the party concerned violated the safety operating procedures. When the laser cutting platform was in interactive operation, he went up to the stage to clean up the remaining materials, causing the upper and lower platforms that were exchanging work to knock it down and squeeze it. the worker was Crushed to death.
- 15
- 139
Report: The driver was chatting while working, and the hook fell from the ceiling and hit the cab. He was unfortunately killed | Remember: being distracted while working = risking your life!
On May 7 , a surveillance video was exposed online: when a crane was closing in after work, a large hook fell from the top and hit the control room. The crane driver was unfortunately killed!
Recently, the Shenzhen Emergency Management Bureau released the cause of the accident:
accident report
At 18:10 on May 7, at a construction site in Shenzhen, a driver was operating a crane truck in the control room. Another worker was standing outside the control room chatting with the driver . During this period, the driver was operating the main hook and hook of the truck crane. The auxiliary hook was lifting and lowering without load. Suddenly, the auxiliary hook fell, hit the top of the control room and then hit the head of the person involved, causing the driver to die on the spot.
β²Accident scene
β²The driver's auxiliary hook and the top of the deformed control room were hit.
Preliminary analysis of the cause of the accident: The auxiliary hook height limiter was not installed on the top of the jib of the truck crane involved . The driver involved operated the truck crane without the guidance of personnel. During the operation, the auxiliary hook rose rapidly and overturned. The auxiliary hook crossed the top pulley of the jib and the pulley anti-separation groove device. The falling auxiliary hook penetrated the top of the control room and hit the head of the driver involved, causing the accident. (The direct cause analysis conclusion shall be subject to the accident investigation report)
Beware of safety accidents caused by distracted mobile phone use !
- 15
- 97
1000 coins to whoever can find the original uncensored video!
Startling video footage capturing the tragic moment a robotic arm fatally crushed a worker at a factory in Thailand has emerged today.The harrowing incident unfolded at the Vandapac factory located in Thailand's Chonburi province on March 27.
The unsuspecting worker appeared to be laying out sheets of material when the arm forcefully swung down and pinned him against a bench.
Unsettling CCTV footage shows how the victim was incapacitated beneath the hulking metal device as a fellow employee continued working across the room, seemingly unaware of the catastrophe unfolding just behind him.
Emergency responders swiftly intervened after the alarm was eventually raised, releasing the man before administering critical aid and rushing him to Chonburi Hospital.
But he was pronounced dead on arrival having sustained major trauma.