- 9
- 62
Worker Mehmet Koyuncu (53), who first lost his arm and then his body to a feed mixer machine in a farm in Aksaray, lost his life. The moment of the incident was recorded by the security camera.The incident occurred around 16.00 at a farm in BaΔlΔ±kaya town. Mehmet Koyuncu was working with a feed mixer attached to a tractor when he got his arm and then his body caught.
At that time, 2 workers who were filling the feed from the machine into sacks realized the situation, ran to the tractor and stopped the machine. Upon notification, gendarmerie and paramedics were dispatched to the scene. The paramedics determined that Koyuncu lost his life.
- 81
- 253
Happened on November 19, 2020 in Naberezhnye Chelny, Tatarstan, Russia
56 years old man named Marat was working in a warehouse of Izher company.
He was working on DIP-300 lathe. Marat wasn't wearing working clothes. He had regular clothes with long sleeves on.
Marat reportedly bended over the lathe and started to "sharpen one of its parts".
Suddenly, the lathe turned on and shredded Marat into pieces. He died on spot.
TV Chenly spoke to neighbours of Marat:
We were living a calm life. We were greeting each other in the morning and in the evening. He was a fine man, always friendly.
One of the neighbours also said:
He and his wife are divorced. He had two kids: older daughter and younger son. They're both adults now. Son is around 23/24, daughter even older.
Son was living with his parents (Marat and his wife). His daughter was living separately.
All seven aftermath photos:
Sources:
Possibly "Famous Video"?
- 15
- 133
Report: The driver was chatting while working, and the hook fell from the ceiling and hit the cab. He was unfortunately killed | Remember: being distracted while working = risking your life!
On May 7 , a surveillance video was exposed online: when a crane was closing in after work, a large hook fell from the top and hit the control room. The crane driver was unfortunately killed!
Recently, the Shenzhen Emergency Management Bureau released the cause of the accident:
accident report
At 18:10 on May 7, at a construction site in Shenzhen, a driver was operating a crane truck in the control room. Another worker was standing outside the control room chatting with the driver . During this period, the driver was operating the main hook and hook of the truck crane. The auxiliary hook was lifting and lowering without load. Suddenly, the auxiliary hook fell, hit the top of the control room and then hit the head of the person involved, causing the driver to die on the spot.
β²Accident scene
β²The driver's auxiliary hook and the top of the deformed control room were hit.
Preliminary analysis of the cause of the accident: The auxiliary hook height limiter was not installed on the top of the jib of the truck crane involved . The driver involved operated the truck crane without the guidance of personnel. During the operation, the auxiliary hook rose rapidly and overturned. The auxiliary hook crossed the top pulley of the jib and the pulley anti-separation groove device. The falling auxiliary hook penetrated the top of the control room and hit the head of the driver involved, causing the accident. (The direct cause analysis conclusion shall be subject to the accident investigation report)
Beware of safety accidents caused by distracted mobile phone use !
- 22
- 92
- 19
- 84